Operation
The Proctor mould is placed on the rotating base plate, and the rammer is inserted into the lifting device. The drop height and the angle of rotation per blow are set by interchangeable drive and angle plates. An electric motor moves the impact surface in the sequence edge, centre and edge.
The following parameters can be preset in the microprocessor software:
- Number of blows per layer
- Number of layers
- Angle of rotation per blow
- Blow sequence (centre/edge)
The safety door also reduces the noise level of the apparatus.
Included in delivery
- Drive plates for drop heights of 305 and 457 mm (EN/ASTM)
- Angle plates for rotation angles of 45° and 60° per blow (EN)
Rammers and Proctor moulds are not included and must be ordered separately. The apparatus can be adapted to EN 13286-2, DIN 18127, ASTM D1557, NF P94-093 and NL-RAW with an accessory kit for each standard. Contact us for the right configuration.
Specifications
| Specification | Value |
|---|---|
| Mould sizes | Ø 100 and 150 mm |
| Drop height | 305 or 457 mm |
| Angle of rotation per blow | 45° or 60° |
| Power supply | 3/N/PE, 400 V, 50 Hz, 0.5 kW |
| Dimensions | approx. 530 × 520 × 1700/2300 mm |
| Weight | approx. 244 kg |
Accessories (sold separately)
| Article no. | Description |
|---|---|
| 10-18550E80 | Sound insulation |
| 10-1752 | Proctor mould Ø 100 mm |
| 10-1754 | Proctor mould Ø 100 mm, split |
| 10-1762 | CBR/Proctor mould Ø 150 mm |
| 10-1764 | Proctor mould Ø 150 mm, split |
| 10-1820 | Proctor mould Ø 101.6 mm (ASTM) |
| 10-1822 | Proctor mould Ø 101.6 mm (ASTM), split |
| 10-1830 | Proctor mould Ø 152.4 mm (ASTM) |

Svenska
Suomi
Norsk Nynorsk
Dansk

